Do you need Highest Quality Medical Grade Power Strips? Brooks Power Systems HM Series undergoes the most stringent testing to assure continuous, safe operation in any application including critical patient care areas in hospitals, health care facilities and medical buildings/offices. This product can also be used where grounding reliability and plug retention is required.
Highest Quality Medical Grade Power Strips
In cases where the number of wall sockets available to access electrical power is inadequate, a power strip may be used to provide additional receptacles. Most power strips consist of a housing containing a strip of electrical outlets. The receptacles are connected to an electrical cord with a plug designed to be inserted into a wall outlet.
A typical wall outlet in the U.S.A. is wired to provide a single-phase, 120 V, AC signal and includes three contacts: a live or hot contact, a neutral contact, and a ground or earth contact. Power strips are also known as plug boards, power boards, power bars, distribution boards, gang plugs, PDUs and multi-boxes.
Installing extra wall outlets is often less desirable than using an RPT. When devices are connected to wall outlets, each individual power cord must be strung or laid out from the device to the wall. When multiple devices are connected in this fashion, multiple cords present multiple tripping and obstruction hazards in a healthcare area. In contrast, RPTs allow multiple cords to be connected to a single location.
- Constructed in Heavy-Duty BPS White Aluminum
- Duplexes are Hospital Grade – certified to UL Standard 498
- Cords are built using Hospital Grade Plugs for dependable performance and reliability
- Outlets are individually tested for Continuity and Leakage Current
- High Potential Testing is performed on 100% of these products
- Units are Certified by TUV to UL Standard 60601-1 (Medical Electrical Equipment)
- All HM Series units are built in the USA using US labor and material
- 15 Amp circuit breaker
- Snap on/slide off mounting clips
*Please call factory for prices*
|BPS HM 10-4-6
|19″ x 5″ x 3″
|BPS HM 10-4-6
|22″ x 14″ x 6″